Descriptions of this Product:
Delta Analog Input Module (DVP04PT-S) is a key part of a Delta Programmable Logic Controller (PLC). Delta Analog Input Module (DVP04PT-S) a device which is allows the connections of four temperature sensors. Delta Analog Input Module (DVP04PT-S) is a common form of Delta Programmable Logic Controller. Delta Analog Input Module (DVP04PT-S) refers to a signal that has a range of values which is much greater than 1 or 0. A sudden, an analog signal can produce a voltage anytime at anywhere and the voltage range is 0V to 10V DC. The signal may be 2V, 3V, 5V, etc. In the Delta PLC world, Delta Analog Input Module (DVP04PT-S) usually measures the analog input points in the following points: -10 to 10V DC, 1 to 5V DC, 0 to 1 mA.
Basically, Delta Analog Input Module (DVP04PT-S) measures either voltage or current from the input device. A Delta Analog Input Module (DVP04PT-S) can increase or decrease in very small increments. Delta Analog Input Module (DVP04PT) has an analog input channel. For one module it has 4 channels. The current excitation of Delta Analog Input Module is almost 1 mA. The Delta Analog Input Module (DVP04PT-S) has a sensor. It is a type of sensor, That is 3-WIRE PT 100ohm 3850 PPM/°C (DIN 43760 JIS C1604-1989). The Digital conversion range of Delta Analog Input Module DVP04PT-S is K-2000~K6000 (K-3280~K11120). The Delta Analog input modules have a temperature input range. The temperature input range from 200°C~600°C.
Electrical Specifications for this Product:
Attribute | Value |
Manufacturer | Delta Electronics |
Series | DVP series |
Power Supply Voltage | 24V DC |
Max Rated Power Consumption | 2W, supplied by an external power |
Operation | 0°C~55°C (temp.), 5~95% (humidity), pollution degree 2 |
Storage | Storage: -25°C~70°C (temp.), 5~95% (humidity) |
Vibration | International standards: IEC61131-2, IEC 68-2-6 (TEST Fc) |
Shock Resistance | IEC61131-2 & IEC 68-2-27 (TEST Ea) |
Functional Specifications for this Product:
Attribute | Value |
Resolution | 16 bits (0.1°C) |
Accuracy | during 0 ~ 55°C, +-0.6% of the full scale |
Response time | 200ms × channels |
Isolation method | Isolation between digital and analog circuitry. There is no isolation between channels. 500VDC between digital circuits and Ground 500VDC between analog circuits and digital circuits 500VDC between 24VDC and Ground |
Digital data format | 2’s complement of 16-bit |
Average function | Yes (CR#2 ~ CR#5) |
Self-diagnostic function | Yes |
Communication mode (RS-485) | Yes (CR#32). when the DVP04PT-S is connected in series with an MPU the RS-485 is disabled |
Item Condition: New
Warranty: 12 Months
