- Product Name: ABB Inverter, 22 KW, 460 V 3-Phase
- Model: ACS880-01-061A-3
-
Brand Name: ABB
-
Power Rating: 22 kw
-
Series: ACS 880
-
Input Voltage: 460V AC
-
Output Voltage: 460V AC
-
Input Phase: Three
-
Output Phase: Three
- Origin: Finland
- Condition: New
ABB ACS880 series AC Inverter for 22kW (30HP) 400V 3 Ph
motor to 45A at high overload or 30kW (40HP) to 58A when Fan/Pump rated.
Operates in VxF or Sensorless Vector as standard and full Closed-loop Flux
Vector or Direct Torque Control (DTC) when an optional Encoder Feedback card is
fitted. Converts fixed frequency Three Phase 400V input to variable frequency
400V to control the speed of a standard AC induction motor, permanent magnet
synchronous motor, servo motor or synchronous reluctance motor.
Size R4: 203mm Wide x 274mm Deep x 576mm High (glandbox is
integrated). IP21.
Weight: 18.5kg.
Overload: 150% x 60 seconds every 5 minutes (High Overload)
Overload: 110% x 60 seconds every 5 minutes (Fan/Pump rated)
Speed Control Range: 0-500Hz.
Braking: To 13 Ohm minimum external resistor (not supplied) - See the Resistor
options linked below or use the 'Which Resistor' button on this page.
Operator Keypad (Assistant Control Panel) with USB included
as standard.
2 Analogue Inputs, 6 Digital Inputs, 2 Analogue Outputs, 2 Digital
Inputs/Outputs, 1 Digital Input Interlock (DIIL), 3 Relay Contact Sets,
terminals for RS-485/Modbus RTU communications or ABB Drive-to-drive (XD2D)
link, terminals for dual channel SIL3 safe torque off (STO), 24V AC/DC input to
power the control unit when the main supply is disconnected.
Three option slots for communications, I/O, encoder feedback, or safety
modules.
Input Current: [as output current]
Input Voltage: 380-415V Three Phase +10% -15% at 50-60Hz ±5%
EMC Compliance: IEC EN61800-3:2004 Category C3 (Industrial)
